The Agent P110 Fire Alarm System is designed for economy and ease of installations and troubleshooting. It contains an interface for a singleSLC, has two built-in notification appliance circuits (NACs), and three on-board relay outputs (alarm, trouble, and supervisory alarm). The LCD annunciator provides annunciation and control of the system. The Auto-Learn feature can be used to quickly configure a system and additional system configuration can be done completely through the annunciator or with an optional PC interface. Options include: NAC expander, meter display, remote relays, and a serial port (for connection to a PC).

• UL Listed

• CSFM Listing

• 1 loop addressable with PDACT standard

• Remote operation of reset, silence, general alarm, alert, recall, and drill functions Drift compensation

• Pre-alarm, pre-signal, positive alarm sequence (PAS), and alarm verification by point Auto-Learn with configuration verification/comparison functions

• Audible or silent one-man walk test

• 500 event history record

• Pull station response time of 2 seconds maximum

• Devices may be individually enabled or disabled

• Devices may be individually verified

• Two built-in NACs, expandable to 4

• Three on-board relay outputs (alarm, trouble, supervisory)

• LCD Screen for main status display

• Audible annunciation of off-normal indications

• Password Protection

• Single addressable SLC accepting up to 99 detectors and 99 function modules

• System amps available 2.0A - expandable to 6.0A

• 3.0A available per NAC built-in circuit

• Auxiliary Power 1 Amp standby, 2 Amp in Alarm

• Auxiliary Power Circuits - 1 resettable and 1
  nonresettable

• Up to a total of 9 annunciators