This compact, cost effective, intelligent addressable control panel supports up to 50 addressable devices of any type of detectors and modules. With an extensive list of powerful features, the MS-9050UD programs just like Fire•Lite’s larger products, yet fits into applications previously served only by conventional panels. The MS-9050UD’s integral DACT transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The power supply and all electronics are contained on a single circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include remote annunciators and reverse polarity/city box transmitter. (4XTMF)

• Listed to UL Standard 864, 9th edition.

• Auto-program (learn mode) reduces installation time. Reports two devices set to the same address.

• On-board DACT.

• 20 software zones.

• Two independently programmable Style Z (Class A) or Style Y (Class B) NAC circuits.

• Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.

• Remote Acknowledge, Silence, Reset and Drill via addressable monitor modules.

• Two programmable relays and one fixed trouble relay.

• Integral 80-character LCD display with backlighting.

• Real-time clock/calendar with automatic daylight savings control.

• History file with 500 event capacity.

• Detector sensitivity test capability (NFPA 72 compliant).

• Maintenance alert warns when smoke detector dust accumulation is excessive.

• One person audible or silent walk test with walk-test log and printout.

• Point trouble identification.

• Waterflow (nonsilenceable) selection per monitor point.

• System alarm verification selection per detector point.

• PAS (Positive Alarm Sequence) and Pre-signal per point  (NFPA 72 compliant).

• Up to eight ANN-BUS annunciators.

• Single addressable SLC loop which meets NFPA Style 4, 6, and 7 requirements.

• 50 addressable device capacity (any combination of addressable detectors and modules).

• Compatible with Fire•Lite’s addressable devices (refer to SLC Wiring Manual).

• Two independently programmable output circuits. Circuits can be configured for the following outputs:

• – Style Y (Class B)

• – Style Z (Class A)

• – Door Holder Service

• – Aux Power Source

• Silence Inhibit and Autosilence timer options.

• Continuous, March Time, Temporal or California code for main circuit board NACs with two-stage capability.

• Selectable strobe synchronization per NAC.

• 2.5 A total power for NACs.

• Autoprogram (learn mode) reduces installation time.

• Custom English labels (per point) may be manually entered or selected from an internal library file.

• Two programmable Form-C relay outputs.

• 20 software zones.

• Continuous fire protection during online programming at the front panel.

• Program Check automatically catches common errors not linked to any zone or input point.